Although the moisture-proof cabinet can be used by plugging in like a household refrigerator, it is also a sophisticated electronic device. When using it, you should pay attention to the following matters:

1. Place the partitions in the box, and the height can be adjusted to a suitable height according to the stored items.

2. Check the status of the indicator lights on the control panel, the status of the temperature and humidity indicators, the screen display is clear, there is no defect, there is no abnormal flashing or screen jumping, and the control buttons are normal.

3. The first time it is powered on and used again after a long period of no use, it should run empty for more than 12 hours, and confirm that the humidity has dropped to a lower level.

4. Connect all the power cords in series according to the numbers on the power plug, and then plug in the power supply (220V\/50HZ)

5. When the humidity reaches the set value and stabilizes, open the door for a few minutes to see if the humidity display value in the cabinet rises.

6. Items with high hygroscopicity, such as cardboard, leather, desiccant, etc., should not be stored in moisture-proof cabinet products. The strong hygroscopicity of such products will cause the dehumidification uniformity of the dehumidification system to be disordered.

7. If it is not necessary, it is recommended not to open the cabinet door frequently, which will cause the humidity to be unstable for a short time.

Moisture-proof cabinet placement requirements:

1. The moisture-proof cabinet must be placed on a horizontal and firm surface so that the center of gravity of the moisture-proof cabinet is in the best position, and the rotating casters at the bottom of the cabinet are fixed to make the cabinet stable.

2. Keep the surroundings of the moisture-proof cabinet clean, and it is strictly forbidden to put inflammable and explosive dangerous goods and strong corrosive acids, alkalis, etc.

3. Leave a certain space on the back of the moisture-proof cabinet, and the distance from the wall or other items must be more than 10CM.

4. Do not place it in the direction of airflow, such as the air outlet of the air conditioner, or in a high temperature place.

5. Do not place in direct sunlight.

6, Do not put it in the place of smoke and water vapor.

The requirements for the use and placement of electronic moisture-proof cabinets are the above aspects. It is best to carefully read the product manual of the moisture-proof cabinet before use, and operate according to the regulations to avoid unnecessary problems.